manualshive.com logo in svg

3Com 3101, Telephone Manual

Share
Download
3Com 3101 Telephone Manual Download Page 144

144

A

PPENDIX

 A: T

ELEPHONE

 I

NSTALLATION

 

AND

 M

AINTENANCE

Table 14   

Possible Problems 

Possible Problem

Suggested Solutions

My telephone has no dial 
tone. The display panel is 
blank.

■

Verify that the power cord is fully inserted in the 
correct connector on the underside of the 
telephone. Use the strain relief tab to prevent the 
cord from becoming unplugged.

■

Verify that each Ethernet cable is connected and 
that each cable is in the proper connection.

■

Remove and add power to the telephone by 
unplugging the power cord at the electric outlet 
and plugging it back in.

■

If the telephone is powered through a powered 
Ethernet cable, make sure that power is applied to 
the cable at its source.

My telephone has “locked 
up.”

■

Your telephone has lost the connection to the 
system. Remove the Ethernet cord from the jack, 
and then re-insert it into the jack.

■

Wait a few seconds. If the telephone still appears to 
be locked, disconnect the electrical power for your 
telephone, and then plug it back in.

Callers cannot leave 
messages on my voice mail.

■

Your mailbox may be full. Log in to your voice 
mailbox and delete some messages.

■

Your telephone may be set up for Greeting Only 
Mailbox. Log in to the NBX NetSet utility and go to 

NBX Voice Mail Settings > Personal Greeting 

and clear the 

Greeting Only Mailbox

 checkbox.

When I park a call, the 
display panel shows “Park 
xtn in use,” and the call 
returns to my telephone.

You have selected a Call Park extension that is already 
in use. Try another Call Park extension. Your 
administrator can add additional Call Park Extensions. 
For details, see 

“Call Park”

 in 

Chapter 7

.

When I dial 9 or 8 to access 
an outside line, the display 
panel shows “All Ports 
Busy.”

No outside lines are available. Try again in a few 
minutes.

After I call another user in 
my organization, I hear a 
tone but no ringing.

The other user may have the 

Hands Free Active on 

Intercom

 feature enabled. Begin speaking after you 

hear the tone.

On my 3Com Business 
Telephone or 3Com 
Manager’s Telephone, all 
incoming internal calls 
come over my speaker 
phone.

You have the 

Hands Free Active on Intercom

 feature 

enabled.

Summary of Contents for 3101



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands