7 Initial Configuration
General
At power-up the Radar will enter "Target Mode" and be ready to react to suitable targets after
approximately 1 minute assuming it is already configured.
The Radar's operating parameters can be configured at any time by accessing the relevant configuration
page on the web browser.
Assuming the Radar has not already been configured, entering the Radar's IP address
(192.168.1.105
is the default) in the laptop web browser address bar will after login (where "admin" is
default username and password) bring up the Status page. Note that for most configuration pages the
Radar will still be in "Target Mode" and so respond to targets as normal. However if in the Alignment,
Detection Zones or Camera pages, then the camera will not be moved to targets to allow the user to
operate the camera undisturbed.
Most pages have help text associated with them. Hovering over the blue question mark beside a menu
item will bring up relevant help text. Some icons also have help text.
Before starting configuration for the first time make sure that the camera image can be viewed on the
laptop as some of the set-up procedures will require it.
Note 1:
To use a downloaded map to make set-up simpler, your laptop needs internet access.
Note2
: Changes made on a web-page have to be stored to the Radar using the Save or Set button on
the page
-
otherwise any changes made may be lost when you navigate away from the page or
close down the browser.
Status Page
s
c
a
n
�
�
�
S
t
a
t
u
s
Initi
a
l
Se
tu
p
Se
tt
i
n
gs
l•Jetwork
Raclar
Camer·a
Alignment
Dete,:tion Zones
Date 8, Time
\/rv1S EvBnt-:;
C
a
m
er
a
Pop up -E:)
Live F
ee
d
T
a
rget
L
og
s
Sys
t
e
m
L
ogs
Ma
int
e
n
a
nc
e
He
l
p
D
i
a
g
n
ost
i
c
s
STATUS
Overall Status
Radar operating correctly
Date & Time
16/10/19 1045
Schedule
Continuous detection
Detection Zones
Set
Camera
Camera connected
Tracking
Off
VMS
VMS connected
Disable Radar
0
Copyright© Ogier Electronics Ltd 2016
Overall Radar
Status information
Disable Radar
Tick-box
Status page screenshot
The Status web page is the initial loading screen. It provides an overview of the Radar operation
including its "Overall Status", whether a schedule or detection zones are set and whether a camera is
connected or VMS set.
Predator Radar Installation Manual_V8_1_28_00
Page 14 of 78
© 360 Vision Technology Ltd
