Video Plugin
•
Video Plugin - Choose video plugin, choice of VLC, JPEG (every 5 seconds), or none.
•
Unicast Transport - Choice of UDP or TCP.
•
Network Latency - Adjust Video player latency/buffer.
•
Download - Download video plugin from the camera.
Desktop Application
•
Framework - Download framework to run desktop application.
•
Application - Download software for the standalone application.
•
Notes - Notes on how to install the desktop application.
OK
to apply the new settings into the Predator.
Cancel
to abandon the changes to the settings.
4
1 Network Settings Recovery
When network settings are changed, the IP address, Net Mask and Gateway are validated before they are
saved. However if the settings are such that the Predatord has settings which mean that it cannot be seen on
the user's network, it may become necessary to use the 'Network Settings Recovery' feature as described
below.
The 'Network Settings Recovery' IP address may conflict with an IP address that is already defined on the
network, it may be necessary to disconnect the Predator from the network and control it locally using a
network connection to a laptop so that the IP address can be set to a suitable setting before the Predator is
reconnected to the main network.
Procedure for 'Network Settings Recovery'
If necessary disconnect the Predator from the main network.
Turn power to the Predator OFF for 3 seconds.
Turn power to the Predator ON for 4 seconds.
Repeat the above five times.
On the final power ON, leave the power switched on for at least 5 minutes to allow the Predator to
initialise.
(See section Locating the Predator on your Network - page
68
)
Predator Radar Installation Manual_V8_1_28_00
Page 74 of 78
© 360 Vision Technology Ltd
