360 Vision PRED-10M Installation & Configuration Manual Download Page 18

Page: 18 / 28

Predator Installation Manual Ver 2.9

Page 18

6 Connections to Predators with HMA

When the HMA (Hinged Mount Adaptor) is fitted to the Predator, the ‘Predator Composite Cable’ is not used.

Connections between the power supply and Predator use conventional cables as detailed below.

24Vac Power connections between Predator PSU and Predator that is fitted with HMA

Cable Size

No IR

IR80

IR110WL

IR130

IR175SW

IR200

0.75mm²

20m

10m

7.5m

N/A

1.00mm²

25m

12.5m

10m

N/A

1.25mm²

30m

15m

12.5m

10m

N/A

1.50mm²

40m

20m

15m

12m

2.50mm²

65m

30m

25m

20m

6.5m

3.00mm²

80m

40m

30m

24m

4.00mm²

100m

50m

40m

32m

10.5m

If a thermal camera is fitted in the Predator use a coax to connect the video signal BNC from Predator that is

fitted with HMA and Predator PSU (PCB-000-0157-xx) CON6. This is used for the thermal camera video.

Gain access to connectors in the HMA

•

Ensure that the fixed part of the HMA is securely bolted to the top of the pole.

•

The hinged part of the HMA (Hinged Mount Adapter) is fastened to the fixed part using three M8x25

long hex head bolts. Use a spanner (13mm) to remove the three bolts. Each bolt is fitted with a

split spring lock washer, a plain metal washer (which prevents the split washer from damaging the

fibre washer) and a fibre washer (which prevents the paint on the hinged part from being damaged

unnecessarily.

• Open the hinge taking care that the gasket is not damaged and support the weight of the Predator.

Gently open the HMA until the lanyard is able to take the weight. If the lanyard appears to support the

weight of the Predator, there is no need to continue to support the Predator. The connection circuit

board (PCB-000-0221-01) can now be seen.

Please make sure there is adequate spare cable (20cm) for when the camera is resting on the lanyard, failure

to do this could damage the connector circuit board.

Camera

Use BNC Video 1 for video connection from Predator.

Power Connections

Connect 24Vac to CON5.

RS485 Connections

Connect RS485/Twisted Pair data cable to CON2.

Thermal Camera (If present)

Use BNC Video 2 for thermal video connection from

Predator.

Summary of Contents for PRED-10M





























Search results

Summary of Contents for PRED-10M

Reviews:

Related manuals for PRED-10M

Brands by name

Popular brands

360 Vision PRED-10M, Installation & Configuration Manual

Search results

Summary of Contents for PRED-10M

Reviews:

Related manuals for PRED-10M

Brands by name

Popular brands