manualshive.com logo in svg

360 Systems Maxx 2470-HD, Operation Manual

Share
Download
360 Systems Maxx 2470-HD Operation Manual Download Page 58

 

 

58 

 

 2470HD Time Delay 

Access...........................................................38 
Front Panel ...................................................38 
Top Cover.....................................................39 

Settings - RAID Controller .........................................50 
Shutdown .................................................................43 
Software License Agreement......................................54 
Software Version .......................................................34 
SVGA Connector Pinout............................................32 
Symbols 

Warning And Information ...............................4 

System Board Ports....................................................32 
System Cooling ...........................................................9 
System LED...............................................................37 
System Monitor Outputs............................................31 
Testing GPI System Monitor Outputs .........................31 
Time Delay Presets....................................................16 
Time Delay Setting....................................................16 
Time to Air................................................................16 

Timing, Output .........................................................19 
Top Cover 

Removing ..................................................... 39 

Trouble Shooting..........................

See

 Fault Diagnostics 

Updating Firmware ...................................................35 
UPS power conditioning .............................................9 
USB 

Firmware Updates ........................................ 35 
Program Updates.......................................... 34 

VANC Line Selection ................................................18 
Vertical (Lines) timing adjustment..............................19 
Video I/O Card..........................................................40 
Video Mode..............................................................17 
Warranty...................................................................56 
Wiring 

GPIO Schematic ........................................... 30 

 

Summary of Contents for Maxx 2470-HD



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands