20
2470HD Time Delay
Configure Network
Network parameters are set in the Configure Network dialog. Network communication for
the Time Delay is designed primarily to support access to error logs and factory diagnostics. It can
also support automatic time updates using the NTP protocol. The system time is used only in the
diagnostic system message logs, it does not affect the operation of the Time Delay in any way.
Use only the NET1 connection on the rear panel to connect to the network. Make no
connection to NET2.
Configure Network dialog
Use the Configure Network dialog to configure network communication settings.
From the Main Menu selection bar at the top of the screen, select
Setup>Options
, then in
the window on the left select Network.
Each Time Delay is shipped with a unique default network Host Name and IP Address.
Qualified network engineers may change these configurations to suit your specific network
environment. Factory defaults for networking are:
•
Disable Network is checked
•
Use DHCP is unchecked
Disable Network Checkbox
This selection turns the network off or on. The default is Disable.