80
File
Transfer
Network
DigiCart/II Plus Owner's Manual
1.
On the source machine, select the cut to be transferred.
2.
Press the
D-NET XFER
button and the display will show:
TRANSFER CUT
PRESS ENTER/CANCEL
3.
If you choose to transfer the directory in which the cut resides, rotate the
SELECT
control clockwise and the display will show:
TRANSFER DIRECTORY
PRESS ENTER/CANCEL
4.
If you choose to transfer the drive in which the directory resides, rotate
the
SELECT
control clockwise and the display will show:
TRANSFER DRIVE
PRESS ENTER/CANCEL
5.
Press the
ENTER
button to confirm your choice. If no destination has
been previously assigned and used, the display will show:
DESTINATION NAME
(NONE SPECIFED)
6.
To assign a new destination name, press the
ENTER
button again. (See
RECEIVER NAMES AND DESTINATION NAMES earlier in this
Chapter). The display will show:
_
NEW DESTINATION NAME
7.
Using the
SELECT
control and the
Left
and
Right POSITION
buttons,
enter the new destination name. When you have spelled out the new
destination name, press the
Right POSITION ARROW
button until the
cursor is to the right of the last character in the new destination name.
Press the
ENTER
button. The display will show:
DESTINATION NAME
(YOUR NEW DESTINATION
NAME)
8.
Rotate the
SELECT
control clockwise. The display will show either:
DESTINATION LOCATION
(THE LOCATION OF THE CUT IN
THE SOURCE MACHINE)
OR
Summary of Contents for DigiCart II Plus DR-2750
Page 12: ......
Page 99: ...DigiCart II Plus Owner s Manual Maintenance Guide 87 ...
