46
Operating Instructions
DigiCart/II Plus Owner's Manual
Renumber Disk
Allows you to number disks for identification purposes. Press and hold the
STOP
button to view a
disk's number and name (if labeled). Once a disk has been assigned a number, it will retain that
number until this function is used to change it.
1.
Press the
ENTER
button. The display will prompt:
0000
RENUMBER DISK
A cursor will blink on the first number.
2.
Use the
SELECT
control and
Left
and
Right POSITION
buttons to choose a new
number.
3.
Press the
ENTER
button to confirm your selection.
Assign Preset
Lets you assign a cut or Linear Stack to a single "Hot Key" on a DigiCart/II Plus Remote Control or
to the letter keys of an alphanumeric keyboard. When assigned, the selection will play immediately
with a single keystroke.
§
Cuts assigned to PRESETS may be Dolby AC-2 or linear format. The maximum
number of linear cuts is 16.
§
PRESETS must be cuts on a hard disk drive. (Not ID 0.XXXX or 6.XXXX)
§
PRESETS are subject to the currently selected RESTART MODE. (
i.e.,
IMMEDIATE or ON COMPLETION).
§
Contents of a directory may be mass assigned to PRESETS by entering the
UTILITY MENU'S ASSIGN PRESET from the directory level.
PRESET 1 = 1 on the RC-210/220 or A on the alphanumeric keyboard.
PRESET 2 = 2 on the RC-210/220 or B on the alphanumeric keyboard, etc.
§
The alphanumeric keyboard's Scroll Lock must be ON for it to ASSIGN or PLAY
PRESETS. Scroll Lock may be ON or OFF to CLEAR PRESETS.
§
It is
not
necessary to clear a PRESET before reassigning it.
A
SSIGNING
A S
INGLE
P
RESET
U
SING
T
HE
RC-205; O
R
RC-210/220 (M
ETHOD
1):
1.
Press the
UTILITY MENU
button and rotate the
SELECT
control until the display
will show:
ASSIGN PRESET
PRESS ENTER/CANCEL
2.
Press the
ENTER
button. The display will show:
PRESET
0
A
UNASSIGNED
Summary of Contents for DigiCart II Plus DR-2750
Page 12: ......
Page 99: ...DigiCart II Plus Owner s Manual Maintenance Guide 87 ...
