manualshive.com logo in svg

360 Systems DigiCart II Plus DR-2750, Owner'S Manual

Share
Download
360 Systems DigiCart II Plus DR-2750 Owner'S Manual Download Page 62

50    

Operating Instructions

DigiCart/II Plus Owner's Manual

Update Directories

This feature allows the user to force the creation of or update the summary file for the directory or
all directories if performed from the drive level.  Originally, this feature was included to facilitate
the transfer of material between DigiCart with different versions of software.  In some cases it may
restore a disk that appears to have lost a cut or exhibits other problems.  When importing material
from a 360 Systems Shortcut, this operation will accelerate the disk initialization process.

WARNING!

WHEN THIS FEATURE IS USED AT THE DRIVE LEVEL, IT WILL UPDATE ALL 10 CUT

DIRECTORIES, AND IT WILL OPEN AND CLOSE EACH FILE ON THE DISK.  IF THE

DISK HAS MANY CUTS, THE UPDATE PROCEDURE CAN BE PROTRACTED.

Partition Drive

This menu item allows the internal hard disk to be partitioned into one to five logical drives.  This may
allow the user more flexibility in organizing large libraries.  Partitioning divides the physical hard disk
space equally from two to five drives (1/

n

), except that drive 1 will always have 

slightly

 less recording

space because system files are stored on that drive.  Partitions are assigned drive numbers 1 though 5,
depending upon how many are created.  These drive numbers are used in the File ID scheme in the same
way as the original drive 0 and 1.  Partitioning is destructive, all data on the hard disk will be lost during
this process.

A logical drive created by this partition process may be formatted, erased, named, etc. in the same
manner as the original drive, without affecting other partitions.

1.

 

Press the 

UTILITY MENU

 button and rotate the

 SELECT

 control until the display

will show:

PARTITION HARD DRIVE

PRESS ENTER/CANCEL

2.

 

Press the 

ENTER

 button.  The display will show:

NUMBER OF LOGICAL

DRIVES:

1

(4.32G)

The number in parenthesis is the drive size.  Rotating the select knob will show
differing numbers of partitions with their approximate drive size.  In this example,
two partitions would each have a size of 2.16GB, 3 partitions would each have a
capacity of 1.44GB, etc.

If you hit the 

ENTER

 key, but have not changed the setting, nothing will be done

to the disk and the following message will appear:

ALREADY SET FOR THIS

NUMBER OF DRIVES

Summary of Contents for DigiCart II Plus DR-2750














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands