STEP 5 | ASSEMBLE PLUMBING
Install included orifi ce plates
1
in the rubber grommets
1
.
Assemble pluming components in the arrangement shown
above
1
. The supplied push to connect adapter in the 360
BANDIT kit connects to 3/8” push to connect compatible hose.
Secure hoses to row unit with provided zip ties
1
.
PLUMBING RECOMMENDATIONS:
To prevent excess fertilizer from dribbling out of the hoses
when product application is shut off , install one Push to
Connect Polypropylene (Inlet x Outlet) 3/8” O.D. check
valve (not included) in the plumbing to each row prior to the
360 BANDIT orifi ces.
A 50 mesh strainer (not included) can be used in the
complete plumbing system between tanks and 360
BANDIT to help prevent debris from blocking orifi ces.
INSTALLATION COMPLETE
STEP 4 | REINSTALL CLOSING SYSTEM
Use long M12 bolts, washers, and nuts
7
to reattach
closing system casting to the 360 BANDIT unit.
Reinstall insecticide attachment if present.
NOTES:
If the closing wheels were removed but you are not
installing the optional Chain Kit, reinstall the closing
wheels at this time.
If the optional Chain Kit is being installed, do not reinstall
the closing wheels.
If pinning up 360 BANDIT disks while running spiked closing
wheels, mount spiked closing wheels in rear most hole.
INSTALLATION INSTRUCTIONS
PAGE 2 |
360YIELDCENTER.COM
12
12
13
14
13
14
15
15
16
16
STEP 3 | INSTALL DISK & HOSE GUIDES
Insert 5/8” X 3” bolt through the disk. Insert bushing
7
(large side fi rst) and hose guide assembly
8
(ear tab facing out).
Slide assembly into the lower hole on the bandit
9
, aligning
the ear tab with corresponding upper hole
1
and secure
with lock nut.
Tighten with 15/16” socket and wrench.
Using a mallet, install provided dust caps over bolt heads.
Route application hose through hole in top of 360 BANDIT
frame
1
.
Repeat for other side.
8
7
10
9
10
11
11
