178
When DECT LED glows green/orange, the registration to the phone is successful.
Related Topics
Enabling the Repeater Mode
Setting the Phone to the Repeater Registration Mode
Satellite Mode
You can bind a W53H/W56H/W59R handset with the VP59/T58A/T58W phone to use the satellite mode.
The phone account is applied to the handset, and all line statuses (for example, DND) on the phone and the hand-
set are synchronized. You can use the phone while you are sitting at your desk, and use the handset while away
from your desk to enhance your business activities.
The phone and the handset can share contacts. For more information, refer to
Satellite mode is available only when one handset is registered. For more information, refer to
Note
: After the handset is bound to your phone, the assigned outgoing/incoming line(s) configured for the handset by your
administrator is disabled.
Topics
Selecting a Handset to Use the Satellite Mode
Push an Active Call to the Handset
Pull an Active Call from the Handset
Selecting a Handset to Use the Satellite Mode
You can select a handset to use the satellite mode with the phone, and configure a mode for whether to continue
the conversation of the handset when the phone goes off-hook.
There are two satellite modes:
l
Busy
: You cannot switch the active call between the phone and the handset. Regardless of the phone or the
handset, the device in a call can initiate a new call. If you are not in a call and try to initiate a call on the
phone/handset, the phone/handset screen will prompt "Path Busy".
l
Take over call
: When the handset is during the call, you can retrieve the call from the handset to the phone after
off-hook. When the phone is during the call, you can push the call to the handset.
Procedure
1.
Swipe left or right to go to the second/third idle screen.
2.
Go to
DECT Settings
>
Satellite Mode
.
3.
Select the desired handset.
4.
Select a mode from the
Select mode
field.
5.
Tap
.
Related Topics
Pull an Active Call from the Handset
Push an Active Call to the Handset
Push an Active Call to the Handset
You can push the active call from the phone to the handset.
Before You Begin
Yealink T58W User Guide
