84
2N TELEKOMUNIKACE a.s., www.2n.cz
Cinterion Module Settings
Transmission volume [dB]
– set the module volume for the outgoing direction.
Reception volume [dB]
– set the module volume for the incoming direction.
Enable connection tone
– enable the connection tone.
End call with SHUP
– end calls with the SHUP command.
Enable HR codec
– enable the Half Rate codec for the GSM network.
Enable AMR codec
– enable the Adaptive Multi-Rate codec for the GSM
network.
Echo cancelling (MC55)
– enable/disable echo cancelling for Cinterion MC-55.
Wavecom Module Settings
GSM-band selection
– select the GSM frequencies for the mobile network.
Echo cancelling
– enable/disable echo cancelling for the module.
Transmission volume [dB]
– set the module volume for the outgoing direction.
Reception volume [dB]
– set the module volume for the incoming direction.
Enable HR codec
– enable the Half Rate codec for the GSM network.
Enable AMR codec
– enable the Adaptive Multi-Rate codec for the GSM
network.
Sierra Wireless Module Settings
Transmission volume [dB]
– set the module volume for the outgoing direction.
Reception volume [dB]
– set the module volume for the incoming direction.
Type of used networks
– select the network types for the module to log in.
Searching priority
– set the network type searching priority.
Init module after call
– initialise the module settings after call end.
Echo canceller mode
– enable/disable echo cancelling for the module.
Enable noise reduction
– enable/disable noise reduction for the module.
Telit Module Settings
Type of used networks
– select the network types for the module to log in.
Automatic band selection
– enable the automatic mobile frequency band
selection.
GSM-band selection
– select the GSM frequencies for the mobile network.
UMTS-band selection
– select the GUMTS frequencies for the mobile network.
Enable HR codec
– enable the Half Rate codec for the GSM network.
Enable AMR codec
– enable the Adaptive Multi-Rate codec for the GSM
network.
Enable FR AMR Wideband codec
– enable the Full Rate Adaptive Multi-Rate
codec for UMTS.
Enable UMTS AMR Version 2 codec
– enable the Full Rate Adaptive Multi-Rate
version 2 codec for UMTS.
Enable UMTS AMR Wideband codec
– enable the Adaptive Multi-Rate
WideBand for UMTS.
Enable echo canceller
– enable/disable echo cancelling for the module.
Enable noise reduction
– enable/disable noise reduction for the module.
Summary of Contents for stargate
