2N stargate User Manual Download

Page: 107 / 190

107

AutoCLIP Routing Table

The window displays the current state of the AutoCLIP table.

Send SMS

This section includes a web interface for SMS sending via the available user
accounts. Sending SMS depends on the outgoing routing rules set in

Messaging /

and limits defined in

User group / Outgoing SMS routing

Gateway / Gateway

configuration / GSM outgoing group

User

– select the user account for SMS sending.

Phone number

– enter the SMS recipient's phone number.

Message

– enter the SMS text to be sent.

Note

If the GSM network shows a temporary error or unavailability, short SMS
are sent three times and long (multipart) SMS five times. If none of the
SMS sending attempts is successful, the SMS will be deleted from the
outgoing SMS database and an

message

Incoming SMS count - Failed

is generated by the gateway.

Note

The maximum message length is 10 SMS. The message can use 7-bit
encoding (up to 1520 characters) or 16-bit encoding (up to 670
characters).

Summary of Contents for stargate































































































































































































Search results

Summary of Contents for stargate

Reviews:

Related manuals for stargate

Brands by name

Popular brands

2N stargate, User Manual

Search results

Summary of Contents for stargate

Reviews:

Related manuals for stargate

Brands by name

Popular brands