2N® SIP Mic User Manual
50
/
68
•
•
•
•
•
Maintenance
This section only describes the action buttons that generate direct actions to be confirmed using
a dialogue window.
Device reboot
–
restart
2N
®
SIP Mic
. The entire restart process takes about 30 s.
Once
2N
®
SIP Mic
obtains the IP address after restart, the login window is displayed
automatically.
Factory reset
– reset all the
2N
®
SIP Mic
parameters except for network settings. To reset
2N
®
SIP Mic
fully, use the Reset button on the device bottom.
Upload configuration
– upload configuration from backup. Press the button to display a
dialogue window for you to choose the configuration file to be uploaded.
Download configuration
– back up the current
2N
®
SIP Mic
configuration. Press the
button to download the full configuration to be saved on your PC.
System upgrade
– upgrade your
2N
®
SIP Mic
firmware. Press the button to display a
dialogue window for you to choose the firmware file for your
2N
®
SIP Mic
.
2N
®
SIP Mic
is
automatically restarted upon a successful firmware upload to make full use of the new
firmware. The entire upgrade process takes less than 1 minute. Refer to www.2n.cz
for the
latest
2N
®
SIP Mic
firmware version. The firmware upgrade does not affect the
configuration.
2N
®
SIP Mic
checks the firmware file and prevents you from uploading a
wrong or corrupt file.
•
Note
The console lock only controls the upper panel buttons. The logical inputs
attachable to the back panel remain active.