2N® SIP Mic User Manual
30
/
68
•
•
•
•
•
•
•
Receive SIP from any IP address (not only from SIP Proxy)
– select receiving SIP
messages from addresses other than SIP Proxy. Used for direct calling to an IP address, for
example.
Send 200 OK and Bye after call rejection
– allow sending 200 OK and BYE messages after
call rejection. It is a specific setting. The call is then identified as received and immediately
terminated on the Proxy. Normally, the call is rejected with cause "404 Not Found".
Answer incoming call automatically
– set the
2N
®
SIP Mic
incoming call answer type:
No
–
2N
®
SIP Mic
does not answer incoming calls automatically. Receive the call
manually.
Yes
–
2N
®
SIP Mic
answer incoming calls immediately automatically.
For x seconds
–
2N
®
SIP Mic
receives incoming calls in x seconds automatically. Set
a value in the range of 1–3600. The maximum ringing time is not applied in this case.
Maximum ringing time
– set the maximum call setup and ringing time in which outgoing
calls are terminated automatically. Set a value in the range of 1–3600. This parameter is
applied only if the preceding parameter is set to No.