2N® SIP Mic User Manual
34
/
68
•
•
•
•
•
•
•
•
•
•
3.1.5 Buttons
Assign one of he seven available functions to the
2N
®
SIP Mic
buttons on this page. See the
button survey below. Logic inputs are located below the call controlling buttons on the device
back side. By default, all the available buttons are inactive and assigned no action. The options
are as follows:
Outgoing call
–
when the button is pressed, a call is set up to the set destination via SIP
Proxy.
Outgoing call ALARM
– when the button is pressed, a call is set up to the set destination
via SIP Proxy. The DTMF code or a voice message is played after the setup.
HTTP request
– when the button is pressed, an HHTP request is sent from
2N
®
SIP Mic
.
DTMF request
– when the button is pressed, a call is set up to the set destination via SIP
Proxy. The selected DTMF code is played after the setup.
Relay control
– the button controls the relay whose terminals are located on the
2N
®
SIP
Mic
back.
Announce to zone
– the button activates the defined announcement to a zone.
Listen to zone
– the button activates the defined listening to a zone.
Change Button Setting
Click the edit symbol at the button to be edited to open a dialogue window. Each type of action
includes three identical options.
Button active
– activate the button to enable the action to be executed.
Name
– button name.
Action
– choose one of seven available actions.