Basic Functions
4.1
30
4.1 Basic Functions
Outgoing Call
1)
Pick up the handset. You can hear the dialtone.
2)
Dial a number. Having dialled the last digit, wait for automatic call setup.
3)
If stored in your or group directory, the called subsriber's name is also
displayed.
4)
The call time will be displayed when the called subscriber answers.
5)
If the called user is busy, you will get the busy tone and the
Call end
message
gets displayed.
Or, you can enter the called number on your phone diplay first and then pick up the
handset to set up the call.
Push the HandsFree button to use the HandsFree function instead of lifting the
handset. The HandsFree button indicator signals activation. Push the HandsFree
button again to terminate the current call.
If the HandsFree button is not programmed on your phone, just press the
confirmation button after dialling a number to activate HandsFree .
Outgoing Call from Telephone Directory
To facilitate dialling, program a telephone directory access button. Use the directory to
search items according to their names or name parts. Pick up the handset, press
for confirmation, or push the HandsFree button to dial the telephone number for the
selected list item.
Speed Dialling
You can program the so-called speed (quick) dialling buttons for frequently used
numbers. Just push the button once to dial the selected telephone number.
Calling Line Identification Restriction
Use the
CLIR
(Calling Line Identification Restriction) button to restrict your
identification.
Remember to press this button before dialling a number. The active CLIR mode is
signalled by the button LED indicator. CLIR remains active until you re-press this
button. If you activate CLIR during dialling, it will be active for the next call.
