2N TELEKOMUNIKACE a.s., www.2n.cz
70/152
4.1.3.5 Settings
The Settings section helps you set the
parameters. The following
2N Helios IP Mobile
®
options are available:
Device name – device name under which
identifies itself to
2N Indoor Touch
®
other LAN devices via
.
2N Helios IP Mobile
®
Auto snapshot – Auto snapshot activation/deactivation.
Settings password – no user has access to the Settings and Add Devices
sections without knowing this password.
2N Helios IP Group Authentication
®
– authentication password for 2N Helios IP
®
. If the password is defined, the
devices
Devices / Add Devices / Local devices
scanner only searches the
and
devices with the
2N Helios IP
2N Indoor Touch
®
same password.
Volume level –
speaker volume level.
2N Indoor Touch
®
Mic sensitivity –
microphone sensitivity.
2N Indoor Touch
®
Caution
The
and
settings only adjust the active call
Volume level
Mic sensitivity
volume. The ringing volume is affected by the system launcher
configuration and cannot be controlled by the application. Set the
ringing volume here:
.
3.3 Launcher Configuration Audio
Ringing tone – select the
ringing tone.
2N Helios IP Mobile
®
SIP Proxy
SIP Proxy – SIP Proxy activation/deactivation
SIP Proxy settings – SIP Proxy setting menu
Video
Multicast/Unicast –
video stream transmission type.
2N Helios IP
Video deactivation – video stream display time for a
device
2N Helios IP
selected from the Devices list.
Earlymedia – video stream transmission activation/deactivation during
incoming ringing from the SIP Proxy registered devices.
Recorder
