2N Indoor Touch User Manual Download

Page: 88 / 152

2N TELEKOMUNIKACE a.s., www.2n.cz

88/152

The selected devices are saved automatically and displayed in the List of devices

immediately after selection.

Note

There are two ways how to remove a device from the List of devices:

Cancel the selection of the required device in the LAN devices menu to

remove an available device.

To remove an unavailable device, swipe your finger from right to left on

the device name row in the List of devices to display and press Delete

next to the Device name.

Proxy Devices

It is necessary to register with a SIP Proxy server to enable SIP Proxy devices.

Note

The application will not allow you to add, create or edit a SIP Proxy
device until connected correctly to a SIP Proxy server.

Summary of Contents for Indoor Touch

























































































































































Search results

Summary of Contents for Indoor Touch

Reviews:

Related manuals for Indoor Touch

Brands by name

Popular brands

2N Indoor Touch, User Manual

Search results

Summary of Contents for Indoor Touch

Reviews:

Related manuals for Indoor Touch

Brands by name

Popular brands