2N TELEKOMUNIKACE a.s., www.2n.cz
92/152
5.1.3 Messaging
This group helps:
Set the GSM gateway to send/receive SMS via SMTP/POP3 or SMPP
Define the routing rules for incoming and outgoing SMS messages
Check the GSM gateway SMS database filling capacity
Caution
This service is file-licensed. Refer to
for the
Management / Licence key
current GSM gateway licence details.
Modules Grouping
Global settings
SMS server enabled – enable/disable the SMS server at the GSM gateway (keep
disabled if you select another SMS processing method).
– set the maximum time for
AutoCLIP routing expires [hours] (1-10000, 0=off)
keeping of the automatic SMS routing record (response) in the AutoCLIP table.
Not sent SMS expires in [hours] (1-10000, 0=off) – delete an SMS in case it was
not sent within the timeout.
Received SMS expires in [hours] (1-10000, 0=off) – delete a received SMS in
case it was not delivered to the e-mail / SMPP user within the timeout.
Delivery Report expires in [hours] (1-10000, 0=off) – delete an SMS waiting for
delivery report and make an error record in the SDR table in case no delivery
report arrives within the set period of time.
Waiting for delivery expires in [minutes] (1–10000, 0=off) – set the maximum
delivery waiting time.
Delay for change of SIM in [seconds] (0–120) –
set the time during which the
currently blocked SIM stays logged in (IDLE), ready to receive SMS/deliveries.
Caution
0=off means disabled expiry, i.e. records are saved into the AutoCLIP
routing table for an indefinite period of time. Therefore, make sure that
the routing priorities are set properly for incoming SMS. Refer to
for details.
Incoming SMS routing