2N TELEKOMUNIKACE a.s., www.2n.cz
37/152
Incoming GSM/UMTS calls can be either DTMF-processed or automatically routed to
the ISDN BRI interface according to the active intelligent GSM gateway rules functions
(Auto CLIP, CLIP routing). They are routed to the ISDN NT, or ISDN TE interface
depending on the GSM gateway configuration.
Incoming GSM/UMTS calls can also be rejected and, with the aid of CLIP, used for
CallBack.
The LCR algorithm routes outgoing calls on the basis of the call type, current time
tariff, day in a week and, if necessary, free minutes of GSM providers.
Tip
2N BRI Enterprise / BRI Lite
®
can also route outgoing calls into the GSM
/UMTS networks according to the B-channel used. In that case, the GSM
/UMTS module is paired with a specific B-channel of the ISDN BRI line.
2N ® Mobility Extension
2N Mobility Extension
®
(ME) is a function that turns your mobile phone into an SIP
phone taking advantage of all the PBX functions. To make your 2N Mobility Extension
®
work efficiently, use the
gateway to assign your mobile phone
2N BRI Lite/Enterprise
®
an account with the same SIP parameters (ID/user/password) that help connect your
office SIP phone to the SIP Proxy server. After this account gets registered with the
SIP Proxy server via
, your mobile phone will work as
2N BRI Lite/Enterprise
®
2N
®
and make use of the services described below.
Mobility Extension
Advantages:
You never miss any important call as you are available at all times.
You can get information SMS messages on missed calls.
You can control your company PBX call forwarding services from your mobile
phone.
You can make use of a comfortable DTMF code control.
You need not make complicated forwarding actions as the function is fully
automatic.
ME can work with any SIP Proxy PBX.
ME can replace any standard VoIP phone.
Calls to your mobile phone are free of charge or at a moderate cost4.
You need not integrate a costly DECT system any longer.
