2N 9137111CKU, Installation Manual

Page: 94 / 113

Installation manual 2N® IP Vario
94 / 113
•
•
By re-pushing the same button during calling or setting up you can hang up, hang up and call to
another telephone number, or activate nothing as defined in the Intercom Configuration /
Hardware /
Keypad subsection of Configuration Manual.
You can also hang up the call any time by pushing if the Hang-up by # button is enabled;
refer to Intercom Configuration / Hardware / Keypad subsection of Configuration Manual.
Calling to Phone Book Position
The 2N
®
IP Vario telephone directory may contain up to 1999 pre-programmed positions. You
can use the quick dialling buttons for positions 1 to 54 only. To retrieve the remaining positions,
use the numeric keypad
if Dial Users by Phonebook Position is enabled; refer to the Intercom
Configuration / Hardware / Keypad subsection of Configuration Manual.
Procedure:
Enter the position number using the numeric keypad (e.g. 05, 15, 200, 1759 – two digits at
least and four digits at most) and push
for confirmation.
You can also hang up the call any time by pushing if the Hang-up by # button is
enabled; refer to Intercom Configuration / Hardware / Keypad subsection of Configuration
Manual.