2N 9137111CKU, Installation Manual

Page: 101 / 113

Installation manual 2N® IP Vario
101 / 113
•
•
Incoming call Door opened/unlocked
3.4 Intercom Control as Viewed by Internal User
Call answering
Incoming calls from 2N
®
IP Vario can be received like any other call. You can open the lock and
activate or deactivate a user or profile during the call using your telephone numeric keypad. The
call duration is limited to avoid
unintentional 2N
®
IP Vario line blocking. Use the Call time limit
parameter to set the maximum call duration (refer to the Intercom Configuration / Services /
Phone / Calls subsection of Configuration Manual). To prolong a call push the # button on your
telephone any time. A short beep 10
s before the call end signals an automatic all termination.
Calling to 2N
®
IP Vario
2N
®
IP Vario allows to answer an incoming call too. To set the required parameters use the
Incoming calls item, refer to the Intercom Configuration / Services / Phone / Calls subsection of
Configuration Manual.
Code Door Opening (Switch Activation)
2N
®
IP Vario is equipped with a door unlocking switch. To activate the switch enter the valid
code (refer to the Intercom Configuration / Hardware / Switches subsection of Configuration
Manual) on the numeric keypad.
Procedure:
Enter the lock 1 or lock 2 activating code using your telephone numeric keypad and push
(confirmation is unnecessary if the Lock code without confirmation option is selected,
refer to the Intercom Configuration / Hardware / Switches / Advanced subsection of
Configuration Manual).
A valid code is announced by acoustic signalling . An invalid code is announced by
acoustic signalling .