2N 913621E User Manual Download Page 51

Page: 51 / 83

2N TELEKOMUNIKACE a.s., www.2n.cz

Note

Being programmed,

is powered from the USB port and need

2N Lift1

not be connected to a telephone line. Having been disconnected, however,

loses power and thus all unsaved data.

2N Lift1

To make your

remember time, leave the line connected during

2N Lift1

programming. Thus, no data will be lost after USB disconnection and the
line will be detected as seized during programming.
The programming interface provides galvanic isolation of the PC and

Lift1

The 10-wire interconnecting cable has no key on the

side, so

2N Lift1

respect the cable colours (see the figure). An inverse connection does not
damage the device.
Correct PC and

connections are indicated by the blue LED on

2N Lift1

the edge, which goes on and signals power supply.
If the PC-

interconnecting program is running in

, the

2N Lift1

green LED starts shining. If not, mount the proper jumper (refer to 2.4 -
Installation) to switch

into the recovery mode.

2N Lift1

The green LED flashes to indicate programming.

Summary of Contents for 913621E




















































































Search results

Summary of Contents for 913621E

Reviews:

Brands by name

Popular brands

2N 913621E, User Manual

Search results

Summary of Contents for 913621E

Reviews:

Brands by name

Popular brands