37
2N TELEKOMUNIKACE a.s., www.2n.cz
Programming Error
If you make a mistake while entering a number (function or value) and find it
before clicking the asterisk, press
to cancel the whole number and enter a
new one.
If
rejects a parameter number or value, you can go on programming -
2N Lift1
®
enter the function number although you typed a wrong value.
If you have programmed and saved a wrong value, re-enter a correct value.
Programming End
Having saved all the values to be modified, press
to make
send an
2N Lift1
®
on-hook signal and hang up.
If you do not press
,
will hang up later without affecting the value
2N Lift1
®
saving process (the values are stored immediately in the memory).
If you are not quite sure of how
will behave after programming, save
2N Lift1
®
the filled-in form for later check.
Message Recording
Record a message in the
(refer to Programming above). This
programming mode
mode is protected with a password or the "Programming disable" jumper if necessary.
Tip
Programmed value check
: enter the parameter number and
, listen
to the parameter value and press
to return to the main menu.
Caution
A drawback of some phones is that they go “deaf” for a fraction of a
whenever you press a button, i.e. send DTMF. In that case, you
second
cannot hear the whole text and are recommended to use another phone.
Caution
Change the setting of parameter 975 to play your message automatically
when an outgoing call is made.
