2N 5024101AU User Manual Download

Page: 66 / 82

2N TELEKOMUNIKACE a.s., www.2n.cz

66/82

New battery installed – allow installation of a new battery pack.

Capacity – nominal capacity value (mAh).

Installation date – installation date used for the battery expiration warning.

CONFIRM NEW BATTERY INSTALLATION – save the new battery parameters
into the system.

Note

The installed battery parameters are not part of the system
configuration and thus are not changed during the factory default reset.

3.3.4 Log

The Log tab shows records on the system start and all important events or errors,

helps detect operational problems and provides firmware troubleshooting support to

the service department.

DOWNLOAD – download the log content to a file.

REFRESH – refresh the log displayed.

Filter – display only the log rows that contain the selected string.

SET – display the log to be filtered.

Summary of Contents for 5024101AU



















































































Search results

Summary of Contents for 5024101AU

Reviews:

Related manuals for 5024101AU

Brands by name

Popular brands

2N 5024101AU, User Manual

Search results

Summary of Contents for 5024101AU

Reviews:

Related manuals for 5024101AU

Brands by name

Popular brands