Installation Manual 2N® IP Style
76
/
88
•
•
•
•
•
•
•
A valid code is notified visually and by a continuous switch activation tone or a predefined
unlocking user sound. An invalid code or interruption longer than as defined in
Timeout
for Entering Numbers
, is signaled acoustically
or using a user sound.
Door Opening (Switch Activation) by 2N
®
Mobile Key
2N
®
IP Style
is equipped with a door unlocking switch.
Activate this switch using the
2N
®
Mobile
Key
authentication (refer to Subs.
of the Configuration manual for IP
Intercoms) in your smartphone.
The application is available for devices with iOS 12 and higher
(iPhone 4s and higher) or Android 6.0 Marshmallow and higher (Bluetooth 4.0 Smart supporting
phones).
Procedure:
According to the authentication mode:
Touch mode
– press
or drag
from left to right on the display (depending on
the Bluetooth authentication setting) to activate the switch.
Tap in app mode
– unlock your smartphone, open the app and press the virtual
button to activate the switch.
Motion mode
– motion has to be detected by the intercom camera to activate the
switch. Arrival in the proximity or waving of the hand will do.
Card mode
– move your smartphone close to the integrated RFID card reader to
activate the switch.
A valid authentication is notified visually and by a continuous switch activation tone or a
predefined unlocking user sound. An invalid authentication is signaled acoustically
or using a user sound.
Signaling LED
A signaling red lock LED pictogram
can be displayed on the notification bar at the display
upper edge. If the pictogram is active, i.e. displayed on the notification bar, it means that
the
2N
®
IP Style
installation area is secure. You can activate the area security, for example, by
assignment to a physical input, via HTTP API, etc.
3.3 Intercom Control as Viewed by Internal User
Call Answering
You can answer incoming calls from
2N
®
IP Style
using your phone like any other calls. You can
unlock the door, activate/deactivate a user/profile via your phone keypad during the call. The
calls, however, are time-limited to avoid unintentional blocking of the
2N
®
IP
Style
line. Set the
maximum call duration in the Call time limit parameter (refer to
Subs.
of the
