2N 02407-001, Installation Manual

Page: 75 / 88

Installation Manual 2N® IP Style
75 / 88
1.
2.
3.
•
•
•
Virtual Number Call
If the Phone function enabled (refer to Subs. 5.4.1 Phone of the Configuration Manual for IP
Intercoms) parameter is selected, you can dial a user-defined phone number using the 2N
®
IP
Style numeric keypad.
Procedure:
Press the button.
Enter the phone number using the numeric keypad and repress the green button for
confirmation.
Press the red button any time to end the call.
Incoming Call Answering/Rejecting
If the automatic incoming call answering function is disabled (refer to Subs. 5.4.1 Phone of the
Configuration Manual for IP Intercoms), any incoming call to 2N
®
IP Style is signaled with loud
ringing. Push the button to answer the call and the button to reject the call.
Door Opening (Switch Activation) by RFID Card
2N
®
IP Style is equipped with a door unlocking switch. To activate this switch, tap a valid card or
chip on the integrated card reader. Remember to complete the user access card ID (refer to
Subs. 5.2.1 Users of the Configuration Manual for IP intercoms) to get an RFID card / chip access.
Procedure:
Tap a valid RFID card / chip on the integrated card reader located in the bottom part of the
device, whose symbol is backlit.
A valid RFID card / chip use is notified visually and by a continuous switch activation tone
or a predefined unlocking user sound. An invalid RFID card / chip use is signaled
acoustically or using a user sound.
Door Opening (Switch Activation) by Code
2N
®
IP Style is equipped with a door unlocking switch. Enter the valid code (refer to Subs. 5.3.1
Switches of the Configuration Manual for IP Intercoms) using the touch numeric keypad to
activate this switch.
Procedure:
Enter the switch activating numeric code using the touch numeric keypad and press the
lock button for confirmation.