background image

56

2GIG EDGE User Guide

Date & Time

Set the panel’s Date and Time .

1 . 

At the System Settings screen, tap the 

Date & 

Time

 (

) icon .

2 . 

Use your finger to scroll and set Time and Date 

settings .

3 . 

Tap

 

 

when finished.

NOTE:

 Date & Time is automatically updated 

during panel registration .

Date & Time Settings

System Tests

To ensure continued protection and proper system 

operations, it is important to perform a sensor and 

console test on a weekly basis .

NOTE: 

To use this feature, you must know the 

Master User Code .

At the System Settings screen, tap 

System Tests

 (

) . 

There are six tests available .

System Tests

Sensors Test

Tests signals between the installed sensors and the 

Control Panel .

1 . 

Tap 

Sensor Tests 

(

) . This places the 2GIG 

EDGE Panel into Walk Test Mode and transmits a 

Walk Test Started

 report to the Central Station .

2 . 

At the 

Sensors Test

 screen, review the list of 

sensors installed with your system .

When tests are successful, a 

GREEN

 check mark 

appears to the left of the test name . This indicates the 

sensor is operating and the wireless signal strength was 

good .

WARNING!! 

If a 

RED

   appears, it indicates the 

test failed . If the sensor continues to fail, contact 

your dealer for technical assistance .

3 . 

Tap the 

 button to return to the System Test 

Menu .

Sensor Tests

Summary of Contents for 2GIG EDGE





























































Reviews: