2easy DT 2-wire, Technical Manual

Page: 15 / 53

DT - System - Technical Guide 12
Note 1: The
MASTER CARD ADD
card must be showed before the Reader can get in to the Authorize DELETE -
Card state, and make sure each operation have to take place within 10 seconds, or the Door Station will return to
normal state automatically.
State Operation Sound hint
standby state
show user card(registered) a long 'D~.' (door opens)
show user card(not -registered) 3 short 'Di' (Di, Di ,Di)
Card
management
state
Enter the card management state a long 'Di~' + a short 'Di' (Di~ Di)
Exit out the card management state
2 short 'Di' (Di ,Di)
Add card/Delete card/Format successful a long 'Di~' (Di~)
Add a already existed card
2 long 'Di~' (Di~, Di~)
Add card/Delete card/Format unsuccessful 3 short 'Di' (Di, Di, Di)
Add a debug card(16666666)
4 short 'Di' (Di, Di ,Di, Di)
Add card failure (1000 cards registered)
5 short 'Di' (Di, Di ,Di, Di, Di)
Card management shoud hints
DMR11/ID/D8
LED-A
LED-B
LED-C
LED-D
State LED-A LED-B LED-C LED-D
Standby ON ON ON ON
Authorize ADD -Card
ON OFF OFF ON
Authorize DELETE -Card
OFF ON OFF ON
Add user card ON OFF OFF OFF
Delete user card OFF ON OFF OFF
Format
ON ON OFF OFF
Card management LED hints
Add user cards by Room:
Delete user cards by Room:
Show the
MASTER CARD
ADD
card in standby
Show the
MASTER CARD
DELETE
card in standby
Press a certain button on the
Door Station, then show the
cards which to be assigned to
this Room. Then press an other
button and show the cards.....
Press the button(s) that the
cards belong to on the Door
Station.(all cards belong to the
room will be deleted)
Show the
MASTER
CARD ADD
card again to
confirm and exit.
Show the
MASTER
CARD DELETE
card
again to confirm and exit.