2easy DT 2-wire, Technical Manual

Page: 14 / 53

11
Authorize master cards:
When Door Station is in
standby, press
PA
button and
hold for 3 seconds to get into
the master card manage state
Show the card to be autorized
as
MASTER CARD ADD ,
you will hear a long beep*
1
show the card to be
authorized as
MASTER
CARD DELETE
, and
then the Reader willexit out
automatically.
Proximity ID Card Operation
DMR11/ID/D8
How to add user cards:
How to delete user cards:
How to delete all user cards(formating):
Show the
MASTER CARD
ADD
card in standby.
Note. sounded Di~,Di
Show the
MASTER CARD
DELETE
card in standby.
Note. sounded Di~,Di
Show the
MASTER CARD
DELETE
card in standby.
Note. sounded Di~,Di
Show the cards to be added,
one by one.
Note. Long beep if add
success, two long beep if
repeated.
Show the cards to be deleted,
one by one.
Note. Long beep if deleted
successfully
Show the
MASTER CARD
ADD card to run format
operation.
Show the
MASTER
CARD ADD
card again to
exit.
However, will exit if no card
was showed within 15s.
Show the
MASTER
CARD DELETE
card
again to exit.
However, will exit if no card
was showed within 15s.
Show the
MASTER CARD
ADD card again within
3 seconds to confirm the
Format operation.
• Up to 1000 user cards can be registered by the Door Station.
• Easy management with LED state and Sound hint.
• There are two master cards, one
MASTER CARD ADD
card and
one
MASTER CARD DELETE
card,When adding a new master
card, the old one will be replaced automatically.
• Card reading distance is from 3 to 5 cm.
The Master cards are necessary when you add or delete user cards,
Please keep the Master cards carefully. However, it is much easier to
manage the ID cards using DT -CONFIG software.