2easy DMR21, Installation Manual

Page: 7 / 20

2
EA
SY
Input the master code.
(Default: [ ] +[#])
Beep+, Beep Beep+, Beep Beep+, Beep Beep+, Beep
Beep+
Beep+ Beep+ Beep+
7.Reset code setting 8. &# function setting 6.Setting operation tone
(Default ON) (Default Normal) (Default 0(opened))
Input the setting code.
Inputting of code
Input the setting code.
5.Setting the unlock mode
04+# 05+#
range:0:(open)/1:(close)
1+#
0/1
0/1 0/1
1+# 1+# 1234+#
Input the setting code.
06+#
Input the setting code.
07+#
(ex.: 1)
Inputting of code Inputting of code Inputting of code
range:0:(on)/1:(off)
(ex.: 1)
range:0:(normal)/1:(reverse)
(ex.: 1)
*
*
*
- The unlock mode can be set on
both monitor and door station,
and the valid value is the number
you set last time. - When the operation tone is
set to 0,pressing the digital
keypad will sent out a sound
of beep.
- When the operation tone is
set to 1,pressing the digital
keypad will blink one time. - Cancel all the passwords except
the master code.
- Restore the master code to
default value(1,2,3,4) - When the item is set to 0,press
the button to cancel the input,
and press the # button to confirm
the input.
- When the item is set to 1,press
the # button to cancel the input,
and press the button to confirm
the input .
Beep+, Beep
-
When the “ cancel” key is pressed, the indicator will show its standby color, the buzzer beeps, and the system
exits the setting mode.
- When there isn’t any operation in 10s, the buzzer beeps, and the system exits the setting mode.
Beep, Beep+
*
- When setting failure, the buzzer beeps.
MODULES
DMR21 Technical Menu -8-