247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
ZEUS mDVR
USERS MANUAL
27
This drop down list will enable you to select which sensor to use for the event marker. The Event
Marker (Sensor 1) is the default sensor to be used with the included event marker cable unless there is a
required custom solution to use a different sensor.
4.8.8
PRE-LOCK TIME (S) & POST-LOCK TIME (S)
Pre-Lock Time (in seconds) defines how many seconds you want to include in the marked video event
file prior to the time that special event occurs. For instance, if the Event Marker Button was pressed at
12:00pm and the Pre-Lock value was 60 then the marked video event file is generated to start at 11:59am
exactly or a minute prior to the “event time”.
Similarly, Post-Lock Time is the time that occurs after the “event time”. For instance a value of 60
entered in Post-Lock will mark the file to stop at 12:01pm. Therefore, you have a marked video file that starts
from 11:59am until 12:01pm. The ZEUS allows the end-user to set the Pre-Lock and Post-Lock up to 600
seconds (10 Minutes). Values entered into these boxes are in seconds.
4.8.9
STOP RECORDING WHEN PLAY BACK
This option will disable recording when the DVRViewer application is connected to the mDVR in play
back mode. Click this check box to enable this feature which will improve simultaneous multiple video channel
play back.
4.8.10
STOP RECORDING WHEN LIVE VIEW
This option will disable recording when the DVRViewer application is connected to the mDVR in live
view mode. Click this check box to enable this feature which will improve simultaneous multiple video channel
live view.
4.8.11
ENABLE FILE ENCRYPTION
If this option is enabled, a password is required to encrypt the video / audio files. When playing back
these same video / audio files the password will be requested. This is an additional security feature to keep
unauthorized users from viewing the video.
Note
: (If the password is lost, the video
CAN NOT
be
retrieved
)
4.8.12
FILE ENCRYPTION PASSWORD
If file encryption is enabled (see above), this is where the password is set.