247securityinc.com
1.866.693.7492
CONFIGURATION MENUS
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA
Pg.34 of 47
•
Remove Hard Drive / DHD
a. If DVR is running, turn the key lock to the OPEN position and wait until DVR shuts down.
Both POWER and REC LEDs must be off. If the vehicle is idling, the IGNITION light will be on.
b. Open the door (
Note:
Leave it open during upgrade process).
c. Remove hard drive by pulling the tray straight out from the DVR until it’s free from the rails.
d. Turn the key lock to the
LOCK
position and wait until DVR boots up. TITAN has finished
booting when both
IGNITION and POWER LEDs (green)
are on solid. The vehicle can be
idling or in
Accessory
mode.
•
Connect to TITAN and Save Current Configuration
a. Follow the first 2 steps from “
CONNECT TITAN TO PC/LAPTOP
”
b. Launch your browser. Delete all browsing history including: history, temp files, cookies
and web form information.
c. Go to “
http://192.168.1.100/
” to access DVR setup. You should now be at the login page.
d. Type “
admin
” as the User Name and “
admin
” as the password.
e. Go through each page and manually record on paper all the settings; it is very important to
record the correct DVR Server Name.
f. Download the configuration file, see
DOWNLOAD CONFIGURATION on page 30.
•
Upgrading MCU (1 to 2 minutes)
a. Go to the
Tools
tab in the setup page.
b. Insert Force
Power-on
plug into the
I/O CANBUS
port on the rear of the system.
c. Click
Choose File
to browse your computer for the MCU file. A brief reminder, if Tech
Support did not send you an update,
DO NOT PROCEED
.
d. Click
Update MCU Firmware
. This popup will display:
e. The popup will close. Follow instruction on screen.
f. When “
Synchronizing (ESC to abort)…
” displays, immediately press the
RESET
button on
the front panel of TITAN: