247securityinc.com
1.866.693.7492
Pg.10 of 47
247securityinc.com | 1.866.693.7492 | 1455 Alderman Drive, Alpharetta GA 30005, USA
SETTING UP YOUR PC - WINDOWS 10
1. Right click on the
Start
button in the lower left corner
2. Select
Network Connections
3. Select and open
Network and Sharing Center
4. Select
Change adapter settings
5. Right click on
Local Area Connection
6. Select
Properties
7. Left click on
Internet Protocol Version 4 (TCP/IPv4)
8. Left click on
Properties
9. Record ANY numbers on this screen; you may need to return to these numbers when finished
configuring TITAN
10. Left click on
Use the following IP Address
button
11. In the
IP address window
type
“192.168.1.50”
12. Left click on
Subnet mask
and
“255.255.255.0”
should populate automatically
13. There should be no other numbers in the
TCP/IP properties
window
14. Left click on
OK
15. Left click on
Close
SETTING UP YOUR PC - WINDOWS 11
1. Click the
Start button
in the lower left corner
2. Type
“network connections”
, click on
View Network Connections
3. Right click
Local Area Connection and click Properties
4. Left click on
Internet Protocol Version 4 (TCP/IPv4)
5. Click the
Properties
button
6. Make sure that
“Use the following IP address:”
is selected
7. In the
IP address window type “192.168.1.50”
8. Left click on
Subnet mask and “255.255.255.0”
should populate automatically
9. Click the
OK
button
10. Click
Close or OK
Note:
If the steps in setting up your PC do not work, contact you IT department concerning your PC,
this is a one-time setup to configure the Zeus Titan DVR.
You may need to return your computer to dynamic settings by selecting
“Obtain an IP address
automatically”
. See Step 4 below.
CONFIGURING ZEUS TITAN
