1Wing XBow2, Build Instructions, Page: 6 / 10

1Wing info@onewing.de
Martin Stobbe www.onewing.de
Am Kuchelberg 2
82266 Inning am Ammersee
2. Build phase bungee hook and servo installation
Bungee hook
Deburr bungee hook edges and add a radius
where the bungee cord ring will touch.
Roughen gluing surfaces according to picture.
Cut a ~3-4 by 12-13mm opening, 3mm from
the nose with a Dremel. Remove the material
al the way to the upper surface skin. Roughen
the surface around the cut out to ensure
proper bonding.
Glue bungee hook with gluing epoxy