1byone O00QH-0514, Instruction Manual

Page: 3 / 31

- 03 - - 04 -
EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
PIR sensor:
The PIR sensor is powered by 3 x AAA batteries,
please insert the batteries using the following
procedure:
·
Remove the screw on the back of the PIR sensor
with a screwdriver. Next, remove the battery
compartment cover.
·
Insert 3 x AAA batteries into the battery
compartment, using the correct polarity to
eliminate the danger of fire.
·
Replace the battery compartment cover and
tighten the screw.
Receiver:
The receiver can be powered by 3 x type C batteries
or by an adapter (output: DC 6V).
a. If powered by batteries, please insert the batteries
using the following procedure:
·
Remove the screws on the back of the receiver
with a screwdriver. Next remove the battery
compartment cover.
·
Insert 3 x C type batteries into the battery
compartment, using the correct polarity to
eliminate the danger of fire.
·
Replace the battery compartment cover and
tighten the screw.
b. If powered by an adapter (recommended adapter
SKU OUS00-0278): Insert the adapter’s connector
into the DC power input jack on the side of the
receiver, then plug into a power outlet.
Safety Note:
For the receiver:
·
Be sure to remove all batteries before connecting
to the adapter and plugging into a safe power
outlet.
·
Do not expose the receiver to water spray or
water drops and do not place liquid-filled objects
such as vases or opened drink containers on or
near the receiver and the power outlet.
·
If power by batteries, replace them when
exhausted with the same type and voltage
battery.
·
Remove the batteries or unplug the adapter from
the power outlet if the Alarm kit is not to be used
for an extended period of time.
For the PIR sensor:
·
The PIR sensor is powered by 3 x AAA batteries.
When exhausted, replace it using the same type
and voltage batteries.
·
Always insert the batteries using the correct
polarity to eliminate the danger of fire.
·
Keep old and new batteries away from children.
·
Old batteries should be properly disposed using
safe environmental practices.
·
Remove the batteries from the PIR sensor if you
do not intend to use the Alarm kit for an
extended period of time.
Low voltage indication: When the batteries are
exhausted, the LED indicator on the receiver and PIR
sensor will flash once every second to remind you to
replace the batteries.