6
Step 3
Insert the saddle post(45) into the
main frame (1) as shown after
loosening and pulling out the
adjusting knob(19),and then select a
desired height to align the hole,and
then fix it tightly by the adjusting
knob(19).
--Fix the seat (52) on the post of the
seat sliding set(49)properly by
spanner.
--Loosen the L adjusting knob(51)
and adjust the seat to your desired
distance, then tighten it properly by
the L adjusting knob(51).
Note: Do not exceed the mark "stop
Step 4
Insert the handle bar post(54) into
the main frame (1) as shown after
loosening and pulling out the
adjusting knob (19), and then select
a desired height to align the hole,and
then fix it tightly by the adjusting
knob(19).
--Fix the handle bar(53) into the
handle bar post(54), and tighten it
properly with wash and
adjusting
knob(51)
.
Note: Do not exceed the
marked"stop"
Caution:
Now the equipment is completed assembled, if you find it is not leveled on the floor you can adjust
it by the adjusting pads(64) . Make sure you have tightened all th-e screws and nuts well before
beginning your workout .
