100FIT 140T, Instruction Manual

Page: 8 / 28

12.After the product is not in use, remove the safety key to prevent mishappening.
13.When in an emergency, quickly pull down the safety switch and step on the left and right side of the
treadmill.
14.Before the treadmill is placed, the side of the left and right handrails needs one meter and a safety
distance of two meters at the back. There is no obstacle in the safe distance.
15.Please use the accessories provided by the original manufacturer, and it is strictly forbidden to change
it privately.
16.The product is an HC grade product with a maximum user weight of 120 KG.
Special Notice:
1.Place the Smart run treadmill in a place where the plug can be can plugged into the socket.
2.Plug the power cord directly into the socket and do not allow looseness.
3.Please use qualified socket to avoid the danger.
4.If the plug and socket are not compatible, please do not touch the plug and ask the electrician to handle
it.
5.Please use a power supply with a voltage of 220V-240V.
6.Please do not let the power cord and roller contact, do not put the power supply on the running belt,
do not use the damaged plug.
7.Unplug the plug from the socket before cleaning and maintenance.
8.WARNING: if the plug is not pulled out, it may lead to personal injury and equipment damage.
9.Please check each part carefully before use.
10.Please do not use this product outdoors, in high humidity and the sun.
11.Please turn off the machine and remove the plug when you leave.
12.For your safety, the power plug of the machine must be grounded.
13.Smart Run Treadmill needs to be connected with voltage stabilizer to prevent any electrical failure in
the product due to voltage fluctuations.
The Smart Run Treadmill you purchased has already installed the main
structure during the
factory process. It is free of installation and can be used when plugged in.
1- Two person required to lift the treadmill out of the box and placed it on
a level surface. (Make sure there is a 50 cm open space before and after
the treadmill to fold and take the power cord, etc.)
2- Pull up the column in the direction of the arrow until the foot switch
hooks the column.