100% TRAJECTA, User Manual

Page: 6 / 110

AS/NZS 2063:2008 Warnings and Standards
(a) NO HELMET CAN PROTECT THE WEARER AGAINST ALL POSSIBLE IMPACTS.
(b) THE HELMET IS DESIGNED TO BE RETAINED BY A STRAP UNDER THE LOWER JAW.
(c) TO BE EFFECTIVE, A HELMET MUST FIT AND BE WORN CORRECTLY. TO CHECK FOR CORRECT
FIT, PLACE HELMET ON HEAD AND MAKE ANY ADJUSTMENTS INDICATED. SECURELY FASTEN
RETENTION SYSTEM. GRASP THE HELMET AND TRY TO ROTATE IT TO THE FRONT AND REAR. A
CORRECTLY FITTED HELMET SHOULD BE COMFORTABLE AND SHOULD NOT MOVE FORWARD TO
OBSCURE VISION OR REARWARD TO EXPOSE THE FOREHEAD
(d) NO ATTACHMENTS SHOULD BE MADE TO THE HELMET EXCEPT THOSE RECOMMENDED
BY THE HELMET MANUFACTURER.
(e) THE HELMET IS DESIGNED TO ABSORB SHOCK BY PARTIAL DESTRUCTION OF THE SHELL AND
LINER. THIS DAMAGE MAY NOT BE VISIBLE. THEREFORE, IF SUBJECTED TO A SEVERE BLOW, THE
HELMET SHOULD BE DESTROYED AND REPLACED EVEN IF IT APPEARS UNDAMAGED.
(f) THE HELMET MAY BE DAMAGED AND RENDERED INEFFECTIVE BY PETROLEUM AND
PETROLEUM PRODUCTS, CLEANING AGENTS, PAINTS, ADHESIVES AND THE LIKE, WITHOUT
THE DAMAGE BEING VISIBLE TO THE USER.
(g) A HELMET HAS A LIMITED LIFESPAN IN USE AND SHOULD BE REPLACED WHEN IT SHOWS
OBVIOUS SIGNS OF WEAR.
(h) THIS HELMET SHOULD NOT BE USED BY CHILDREN WHILE CLIMBING OR DOING OTHER
ACTIVITIES WHERE THERE IS A RISK OF HANGING OR STRANGULATION IF THE CHILD GETS TRAPPED
WHILE STILL WEARING THE HELMET.
DISTRIBUTED BY
100% Speedlab, LLC
9630 Aero Drive, San Diego, CA 92123
Ph: 1.619.876.4202 • www.ride100percent.com
Trajecta Manual 03.indd 6 3/25/19 4:15 PM