Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
759
•
Key Valid Period
•
Key Server
Description
Select a key expiration period that is based on the date when the key from the key server
is obtained for the first time (beginning of use).
When the key expires, a new key is obtained from the key server and the expired key is
automatically replaced. If the key expiration period is changed, the same key is used
from the first date of use until the key expired. Note that the "first date" indicates the
first day of use instead of the first day of the key changed.
Input condition/
Display contents
•
Unlimited
The same key is used until exactly 20 years elapses since the key was first used.
•
1 month - 12 month
The same key is used until the date and time in the specified month elapses since
the key was first used. If the same date does not exist in the specified month (such
as April 31st), the expiration date of the key becomes the last date of the specified
month.
Description
Select the key server ID that is assigned for the master or slave server.
"None" and the registered key server ID are displayed as options.
Input condition/
Display contents
•
Master
-
None
-
1
-
2
•
Slave
-
None
-
1
-
2
The same server ID (except for "None") cannot be selected for both the master and slave servers. Note that "None"
cannot be selected for both of the servers when RAID groups are registered in the key group.
The key can only be updated when the master server is specified. Refer to
"1.11.8 Update SED Authentication Key"
for details.
To perform maintenance of the key server, the key server setting parameters must be released temporality. Select
"None" for the target key server before starting maintenance. After maintenance is complete, set the key server
parameters again.
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......