Chapter 1 System Management
1.9 Event/Dump Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
145
2
Specify whether to notify each event.
■
Setting based on Severity (for the ETERNUS DX8700 S3/DX8900 S3)
■
Setting based on Severity (for the other models)
•
The events are classified into three levels: "Error Severity Level", "Warning Level", and
"Informational Level".
Click the [Setting based on Severity] tab, [Error Severity Level] tab, [Warning Level] tab or
[Informational Level] tab to display the setting fields for each level.
•
Event notifications can be reset to the default state. Click the [System Defaults] button to display
the default state and click the [Set] button. For the settings, refer to
"Initial state list" (page 741)
•
When setting the REMCS recommended pattern, click the [REMCS Defaults] button to display the
REMCS recommended pattern and click the [Set] button. For the settings, refer to
recommended pattern list" (page 745)
•
For the ETERNUS DX8700 S3/DX8900 S3, the notification methods that are specified in this
function determine whether to display the LCD message on the Overview screen and the Operation
Panel.
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......