ZyWALL 30W
6
6. Click
Advanced
. Remove any previously installed gateways in
the
IP Settin
gs tab and click
OK
to go back to the
Internet
Protocol TCP/IP Properties
screen.
7. Click
Obtain DNS server address automatically
if you do
not know your DNS server IP address(es).
If you know your DNS server IP address(es), click
Use the
following DNS server addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
If you have more than two DNS servers, click
Advanced
, the
DNS
tab and then configure them using
Add
.
8. Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9. Click
OK
to close the
Local Area Connection Properties
window.
2.2 Checking Your Computer’s IP Address
1.
In the computer, click
Start
, (
All) Programs
,
Accessories
and then
Command Prompt
.
2. In
the
Command Prompt
window, type "ipconfig" and then press
ENTER.
Your computer’s IP address must be in
the correct range (192.168.1.2 to 192.168.1.254) with subnet mask 255.255.255.0 in order to communicate with
the ZyWALL.
Refer to your
User’s Guide
for detailed IP address configuration for other Windows and Macintosh computer
operating systems.
3 Configuring Your ZyWALL
Choose one of these methods to access and configure the ZyWALL. This
Quick
Start Guide shows
you how to use the web configurator wizard only. See your
User’s Guide
for background information on all ZyWALL features and SMT
configuration. Click the web configurator online help for screen-specific web help.
Web Configurator
SMT (System Management Terminal). Access the SMT via:
o Console port using terminal emulation software
o LAN, WLAN or WAN using Telnet
