ZyWALL 1 Internet Security Gateway
9
5.
Select the
Internet Protocol (TCP/IP)
entry and click the
Properties
button.
6.
Select
Obtain an IP address
automatically
and click the
Advanced
button.
7.
Select any installed gateways and click
Remove
until there are none listed.
8.
Click the
WINS
tab and select any WINS addresses. Click
Remove
until
there are none listed.
9.
Click the
DNS
tab and select any DNS addresses. Click
Remove
until there
are none listed.
10.
Click
OK
to save and close the
Advanced TCP/IP Settings
window.
11.
Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
Restart your computer if prompted, making sure that your ZyWALL is
turned on first.
Configuring Static TCP/IP Properties
1.
In the
Network and Dial-up Connections
window, click the
TCP/IP
entry
to select it and click the
Properties
button.
2.
In the
TCP/IP Properties
window, select
Use the following IP Address
.
3.
Type your information into the following fields:
IP
address
,
Subnet
mask
,
Default
gateway
,
Preferred
DNS
server
,
Alternate
DNS
server
(optional).
4.
Click
OK
to save and close the
Internet Protocol (TCP/IP) Properties
window.
5.
Click
OK
to close the
Local Area Connection Properties
window.
6.
Restart your computer if prompted, making sure that your ZyWALL is
turned on first.
Verifying TCP/IP Properties
1.
In the taskbar, click
Start
,
Programs
,
Accessories
and then
Command
Prompt
.
2.
In the
Command Prompt
window, type "ipconfig" and then press
[ENTER]
. The window will display information about your connection-
specific DNS suffix, IP Address, Subnet Mask and Default Gateway.
