ZyWALL 1 Internet Security Gateway
8
2.
In the
TCP/IP Properties
window, select
Specify an IP address
.
3.
Type your information into the
IP
Address
and
Subnet
Mask
fields.
4.
Click the
Gateway
tab. Highlight any installed gateways and click the
Remove
button until there are none listed. Type your gateway address in
the
New
gateway
field and click
Add
.
5.
Click the
DNS Configuration
tab and select
Enable DNS
. Make sure all
the fields in this tab are correct.
6.
In the
TCP/IP Properties
window, click
OK
.
7.
In the
Network
window, click
OK
.
8.
Restart your computer if prompted, making sure that your ZyWALL is
turned on first.
Verifying TCP/IP Properties
1.
In the taskbar, click
Start
and then
Run
.
2.
In the
Run
window, type "winipcfg" and then click
OK
. The
IP
Configuration
window opens and lists information such as your computer's
IP address, subnet mask and default gateway.
3.
Select your network adapter.
4.
When using DHCP, the default TCP/IP values assigned by the ZyWALL
(shown earlier) are now displayed.
Windows NT/2000
Installing TCP/IP Components
TCP/IP should already be installed on Windows NT and 2000 systems.
Configuring TCP/IP
Configuring Dynamic TCP/IP Properties
1.
Click
Start
in the task bar (usually at the lower left-hand corner of the
screen).
2.
Click
Settings
and then
Control
Panel
.
3.
In the
Control
Panel
window, double-click the
Network
and
Dial-up
Connections
icon.
4.
Right-click the
Local Area Connections
icon and click
Properties
.
