ZyXEL Communications ZyWALL 10, Руководство пользователя

Страница: 143 / 254

ZyWALL 10 Internet Security Gateway
System Maintenance & Information 11-5
Figure 11-6 System Maintenance - Time and Date Setting
Table 11-3 Time and Date Setting Fields
Field Description
Use Time Server when
Bootup= Enter the time service protocol that your timeserver will send when the
ZyWALL powers up. Choices are
Daytime (RFC 867) , Time (RFC-868) ,
NTP (RFC-1305) and None . The main differences between them are the
format, e.g., the Daytime (RFC 867) format is day/month/date/year/time
zone of the server while the Time (RFC-868) format gives a 4-byte
integer giving the total number of seconds since
2000/1/1
at 0:0:0. The
NTP (RFC-1305) format is similar. Not all timeservers support all
protocols, so you may have to check with your ISP/network administrator
or use trial and error to find a protocol that works. If you select
None
(this is the default value), you can enter the time manually but each time
the system is booted, the time & date will be reset to
2000/1/1
0:0:0 .
Time Server IP
Address= Enter the IP address of the your timeserver. Check with your
ISP/network administrator if you are unsure of this information.
Current Time:
New Time Enter the new time in hour, minute and second format.
Current Date:
New Date Enter the new date in month, date and year format.
Time Zone= GMT+0800 Press the [SPACE BAR] to set the time difference between your time
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time: 00 : 00 : 00
New Time (hh:mm:ss): 00 : 04 :42
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= GMT+0800
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.