ZyXEL Communications ZYAIR, Руководство пользователя

Страница: 329 / 402

ZyAIR Wireless Gateway Series User’s Guide
Call Scheduling 31-1
Chapter 31
Call Scheduling
Call scheduling (applicable for PPPoE or PPTP encapsulation only) allows you to dictate when a
remote node should be called and for how long.
31.1 Introduction
The call scheduling feature allows the ZyAIR to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a video cassette recorder (you
can specify a time period for the VCR to record). You can apply up to 4 schedule sets in
Menu 11.1 –
Remote Node Profile . From the main menu, enter 26 to access Menu 26 – Schedule Setup as shown next.
Figure 31-1 Menu 26 Schedule Setup
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2, 3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3
and 4 as the ZyAIR, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3
and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
Menu 26 - Schedule Setup
Schedule Schedule
Set # Name Set # Name
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel: