ZyXEL Communications ZYAIR, Руководство пользователя

Страница: 222 / 402

ZyAIR Wireless Gateway Series User’s Guide
LAN Setup 19-3
Table 19-1 Menu 3.2 DHCP Ethernet Setup
FIELD DESCRIPTION EXAMPLE
DHCP If set to Server , your ZyAIR can assign IP addresses, an IP default
gateway and DNS servers to Windows 95, Windows NT and other
systems that support the DHCP client.
If set to
None , the DHCP server will be disabled.
If set to Relay , the ZyAIR acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients. Enter the IP address of the actual, remote DHCP server in the
Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
Server
(default)
Starting Address This field specifies the first of the contiguous addresses in the IP
address pool.
192.168.1.33
Size of Client IP Pool This field specifies the size or count of the IP address pool. 32
First DNS Server
Second DNS Server
Third DNS Server
Press [SPACE BAR] to select From ISP , User Defined , DNS Relay
or None and press [ENTER].
The DNS servers are passed to the DHCP clients along with the IP
address and the subnet mask.
From ISP
IP Address Enter the IP addresses of the DNS servers. This field is available
when you select User-Defined in the field above.
N/A
DHCP Server
Address
If Relay is selected in the DHCP field above then enter the IP address
of the actual remote DHCP server here.
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Table 19-2 Menu3.2 TCP/IP Ethernet Setup
FIELD DESCRIPTION EXAMPLE
TCP/IP Setup
IP Address Enter the (LAN) IP address of your ZyAIR in dotted decimal notation 192.168.1.1
IP Subnet Mask Your ZyAIR will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing subnetting,
use the subnet mask computed by the ZyAIR.
255.255.255.0
RIP Direction Press [ SPACE BAR
] to select the RIP direction. Choices are Both , In
Only , Out Only or None .
Both