background image

Configuring Infrastructure mode

   

●     

Infrastructure Introduction

 

●     

Configure wireless access point to Infrastructure mode with SMT

 

●     

Configure wireless access point to Infrastructure mode with Web configurator

 

●     

Configure wireless station to Infrastructure mode 

 

 

●     

Introduction

What is Infrastructure mode ?

Infrastructure mode, sometimes referred to as Access Point mode, is an operating mode of an 802.11b/Wi-Fi client unit. In infrastructure mode, the 
client unit can associate with an 802.11b/Wi-Fi Access Point and communicate with other clients in infrastructure mode through that access point.

Configuration Wireless Access Point to Infrastructure mode using SMT.

To configure Infrastructure mode of your ZyAIR G-5100 wireless AP please follow the steps below.

1. From the SMT main menu, enter 3 to display Menu 3 – LAN Setup.

2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.

                                    

     Menu 3.5 - Wireless LAN Setup

   ESSID= Wireless                                      Edit MAC Address Filter= No
   Hide ESSID= No                                       Edit Roaming Configuration= No
   Channel ID= CH06 2437MHz                      Block Intra-BSS Traffic= Yes
   RTS Threshold= 2432                                 Number of Associated Stations= 32
   Frag. Threshold= 2432                               Breathing LED= Yes
   WEP Encryption= Disable                          Output Power= 17dBm
         Default Key= N/A
         Key1= N/A
         Key2= N/A
         Key3= N/A
         Key4= N/A
         Authen. Method= N/A 

               Press ENTER to Confirm or ESC to Cancel:

Содержание ZyAIR G-5100



































































Отзывы: