manualshive.com logo in svg

ZyXEL Communications XS1930 Series, Руководство пользователя

Серия устройств ZyXEL Communications XS1930 обеспечивает высокую производительность и надежность. Пользователи могут бесплатно скачать руководство по эксплуатации на нашем сайте. Эти инструкции помогут вам использовать все функции и возможности устройства. Загрузите их сейчас с manualshive.com.

Поделиться
Скачать
background image

Chapter 4 The Web Configurator

XS1930 Series User’s Guide

60

VLAN

This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending 
on what you configured in the Switch Setup menu). You can also configure a protocol based 
VLAN or a subnet based VLAN in these screens.

Static MAC 
Forwarding

This link takes you to a screen where you can configure static MAC addresses for a port. These 
static MAC addresses do not age out.

Static Multicast 
Forwarding

This link takes you to a screen where you can configure static multicast MAC addresses for 
port(s). These static multicast MAC addresses do not age out.

Filtering

This link takes you to a screen to set up filtering rules. 

Spanning Tree 
Protocol

This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent 
network loops. 

Bandwidth 
Control

This link takes you to a screen where you can configure bandwidth limits on the Switch.

Broadcast Storm 
Control

This link takes you to a screen to set up broadcast filters. 

Mirroring

This link takes you to screens where you can copy traffic from one port or ports to another port 
in order that you can examine the traffic from the first port without interference.

Link Aggregation

This link takes you to screens where you can logically aggregate physical links to form one 
logical, higher-bandwidth link.

Port 
Authentication 

This link takes you to a screen where you can configure IEEE 802.1x port authentication for 
clients communicating via the Switch.

Port Security

This link takes you to screens where you can activate MAC address learning and set the 
maximum number of MAC addresses to learn on a port. 

Time Range

This link takes you to a screen where you can define different schedules.

Classifier

This link takes you to screens where you can configure the Switch to group packets based on 
the specified criteria. 

Policy Rule

This link takes you to a screen where you can configure the Switch to perform special treatment 
on the grouped packets. 

Queuing Method This link takes you to a screen where you can configure queuing with associated queue 

weights for each port.

Multicast

This link takes you to screens where you can configure various multicast features, IGMP 
snooping, MLD snooping-proxy and create multicast VLANs.

AAA

This link takes you to a screen where you can configure authentication, authorization and 
accounting services via external servers. The external servers can be either RADIUS (Remote 
Authentication Dial-In User Service).

Loop Guard

This link takes you to a screen where you can configure protection against network loops that 
occur on the edge of your network. 

Layer 2 Protocol 
Tunneling 

This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling) 
settings on the Switch.

PPPoE

This link takes you to screens where you can configure intermediate agent settings in port, 
VLAN, and PPPoE.

Errdisable

This link takes you to screens where you can view errdisable status and configure errdisable 
settings in CPU protection, errdisable detect, and errdisable recovery.

Green Ethernet

This link takes you to a screen where you can configure green Ethernet settings in EEE, auto 
power down, and short reach for each port.

LLDP

This link takes you to screens where you can configure LLDP settings.

IP Application

Static Routing

This link takes you to a screen where you can configure IPv4 static routes. A static route defines 
how the Switch should forward traffic by configuring the TCP/IP parameters manually.

DHCP

This link takes you to screens where you can configure the DHCP settings. 

Table 19   Navigation Panel Links  (continued)

LINK

DESCRIPTION 

Содержание XS1930 Series






























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XS1930 Series

DANLERS CESF PIR Installation Notes preview
CESF PIR
Бренд: DANLERS Страницы: 2
E-T-A 921 Series Instructions For Installation Manual preview
921 Series
Бренд: E-T-A Страницы: 6
ifs POC2502 Series User Manual preview
POC2502 Series
Бренд: ifs Страницы: 352
Cole Hersee 75920 Quick Start Manual preview
75920
Бренд: Cole Hersee Страницы: 2
NTI SE-15V-16-L Installation And Operation Manual preview
SE-15V-16-L
Бренд: NTI Страницы: 15
ATEN KVMP CS1782A Quick Start Manual preview
KVMP CS1782A
Бренд: ATEN Страницы: 2
Kramer DigiTOOLS VS-41USB User Manual preview
DigiTOOLS VS-41USB
Бренд: Kramer Страницы: 8
TRENDnet TK-205K - PS/2 KVM Switch (German) Anleitung Zur Schnellinstallation preview
TK-205K - PS/2 KVM Switch
Бренд: TRENDnet Страницы: 11
Ametek SIL IntelliPoint RF S*R*L Series Installation And Operating Instructions Manual preview
SIL IntelliPoint RF S*R*L Series
Бренд: Ametek Страницы: 93
Shinybow USA SB-8804LCM Instruction Manual preview
SB-8804LCM
Бренд: Shinybow USA Страницы: 16
Thinklogical OriginKVM 41 Product Manual preview
OriginKVM 41
Бренд: Thinklogical Страницы: 17
Tripp Lite 0SU70032 Quick Manual preview
0SU70032
Бренд: Tripp Lite Страницы: 3
rako RMR-VF User Manual preview
RMR-VF
Бренд: rako Страницы: 5
Horstmann ServicePlus S11 User Operating Instructions Manual preview
ServicePlus S11
Бренд: Horstmann Страницы: 8
Eaton TM-1-8290/E/SVB Instruction Leaflet preview
TM-1-8290/E/SVB
Бренд: Eaton Страницы: 2
Subject Link RPT-2012/P-4F-T-1 Series Hardware Installation Manual preview
RPT-2012/P-4F-T-1 Series
Бренд: Subject Link Страницы: 2
Maiwe MIEN2206 User Manual preview
MIEN2206
Бренд: Maiwe Страницы: 14
Intellinet 560757 User Manual preview
560757
Бренд: Intellinet Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды